SuZhou Tonkida Electromechanical Technology Co., Ltd Professional SMT whole line supplier

The machine is placed in a strong wooden box. After the box is opened with a screwdriver, the machine is carefully moved away from the wooden box with a forklift truck. Then the multiple foam is removed and the anti-static steam beads are removed.

After removing the multiple foam and removing the anti-static foam, place the machine on a firm, flat surface and unlock it by following these steps:

1. Unfasten the temporary device that fixes the head during transportation.

2. Move the pickup and placement head to the middle of the machine.

3. Unfasten the Z-axis and remove the Z-axis foam pack.

4, Install the accident alarm light on the top and insert the four-pin connector.

5, adjust the screw of the machine foot, so that the machine is in a horizontal state, and the eight feet are stable contact with the ground.

6, adjust the level: use the level to adjust the front and back X axis, and then Y axis, adjust the eight feet to complete it.

Note: Calibrate the machine after each reposition. After physical CALIBRATION, the user must run the SYSTEM CALIBRATION software to re-detect the A mark.

7. Install air filter.

8, install the conveyor belt and other optional parts (if with).