SuZhou Tonkida Electromechanical Technology Co., Ltd Professional SMT whole line supplier

1. When the machine is running, try to control the temperature at about 25 degrees, not too high or too low.

2. When we print solder paste, the tools we need are solder paste, scraper, dust-free paper, steel plate, cleaner and stirring knife.

3. The more nozzles, the faster the installation speed. Usually, we can solve most assembly needs with four or eight head mounters.

4. The nozzle is easily damaged. Check the nozzle before using the patch machine. If worn, cracked or deformed, it must be replaced.

5. Nozzle relies on negative pressure suction parts. If the negative pressure is too low or there is no negative pressure, the suction assembly will deflect or not pump the assembly.

6. Unless it is a very sophisticated device, it is usually not necessary to use a solder paste machine, and manual mixing is sufficient.

7. There are three types of reflow welder, namely, three-temperature reflow welder, six-temperature zone and eight-temperature zone, which can be selected according to needs.

8. The SMT machine can be divided into three kinds according to the number of heads: four, six and eight. It can also be classified according to its function. Usually, there are LED mounters and multi-function mounters. The former can only install LED devices at a faster speed, while the latter can install various devices at a slower speed.

9. If the placing machine has deviations during the placing process, we can check whether the lens needs to be cleaned, whether the paper feeder is stuck and whether the nozzle is working smoothly.

10. When making a new project file, if you need to change the material, you need to make the size and shape of the material in the actual location of the system correspond one by one, and then perform the placement.