SuZhou Tonkida Electromechanical Technology Co., Ltd Professional SMT whole line supplier

What are the preparatory work before starting the Samsung chip machine?

1. Prepare product process documents for Samsung chip mounter.

2. Obtain materials (PCB, components) according to the mounting list of product process documents, and check.

3, for the PCB that has been opened, according to the length of opening time and whether it is damp or contaminated, cleaning and baking are carried out.

4. Check the components after opening, and handle the damp components according to the management requirements of SMT process components.

5, according to the specifications and types of components, select the integrated feeder, and correctly install the component braid feeder. When loading, the center of the component must be aligned with the pick up center of the feeder.

6, after the front is ready, we will open the SMT Samsung chip machine according to the SMT equipment safety technical operation specifications.

7, secondly, we need to check whether the vacuum pressure of the SMT Samsung SMT machine has reached the requirements of the equipment, the vacuum value of the Samsung SMT machine is usually 6kgjf/cm2 ~ 7kgf/cm2.

8. Open the servo system of Samsung chip mounter and return the X and Y axes of Samsung chip mounter to the initial position of the source point.

9, according to the width of the PCB circuit board, adjust the guide rail width of the Samsung chip conveyor system, the guide rail width should be greater than the PCB width of about 1mm, while ensuring that the PCB slides freely on the guide rail.

10. Check and ensure that there are no obstacles in the moving range of the guide rail and mounting head of the Samsung mounter, around the automatic replacement nozzle library, and on the tray rack.

11. Set up the PCB positioning device on the Samsung mounter and start the mounting.