SuZhou Tonkida Electromechanical Technology Co., Ltd Professional SMT whole line supplier

Monthly check this section should be carried out by nozzle type and changing station. Part Name Procedure Remarks Move the LED light of the lens to check whether each LED brightness is sufficient, if it is not bright, the entire LED part should be replaced. Check the O-ring for each nozzle shaft and find that it is aging and should be replaced promptly.

X-axis lead screw to remove dust and residue, apply a thin layer of grease by hand X-axis guide to remove dust and residue, if necessary, apply a thin layer of lubricant by hand on the rack transmission components. Check the wear and tightness of the R shaft drive belt, and replace the belt or adjust its tightness if necessary.

W shaft screw to wipe the dust and residue, hand coated with a thin layer of grease supply valve to check whether its solenoid valve can work properly, conveyor belt to check its wear and tightness, if necessary to replace the belt or high-speed tightness.