SuZhou Tonkida Electromechanical Technology Co., Ltd Professional SMT whole line supplier

Basic safety rules and procedures:

1, the machine operator should receive the correct method of operation training.

2, check the machine, replace parts or repair and internal adjustment should be turned off the power (the maintenance of the machine must be carried out in the case of pressing the emergency button or power off.

3, make sure that "read the coordinates" and adjust the machine YPU (programming parts) in your hand to stop the action at any time.

4, ensure that the "interlock" safety equipment remains effective to stop the machine at any time, and the safety detection on the machine can not be skipped or short-circuited, otherwise it is prone to personal or machine safety accidents.

5. Only one operator is allowed to operate one machine during production.

6, during the operation, ensure that all parts of the body, such as hands and first class, are outside the scope of the machine.

7, the machine must be properly grounded < grounded, not connected to the neutral line >.

8, do not use the machine in a burning gas or dirty environment.